Blog masonry

Quote Form


Contact us today using our contact form below or call us. Let us install or repair your roof.

How to Ensure That Your Waterproofing Work Lasts

When it comes to waterproofing work, you want to make sure that the job is done correctly and will last for years to come. To ensure that your waterproofing work stands up to the test of time, there are a few steps you can take to ensure its long-term success. In this blog post, we’ll explore how to ensure that your waterproofing work lasts.

Check the weather forecast

When preparing for waterproofing work, it is important to check the weather forecast. If there is a chance of rain, snow or high humidity in the near future, it’s best to wait for better conditions before undertaking any waterproofing projects. Waterproofing materials can be damaged or fail if applied in wet or humid conditions, leading to costly repairs down the line. Checking the forecast will help you plan ahead and ensure your project has the best possible chance of success. Additionally, when temperatures are too low, some materials may not adhere properly, so pay attention to the temperature range as well. By considering the weather forecast and using the right materials, you can guarantee that your waterproofing work will last.

Do a thorough inspection

Before you begin any waterproofing work, it is important to do a thorough inspection of the area in question. Start by checking the weather forecast and making sure that it is not going to rain in the near future, as this could affect the success of your project. Once you are sure of the weather, start inspecting the area around your home.

Clear out any debris or foliage that might be blocking access to water sources or draining areas, as this can impede drainage and lead to water problems in the future. Then check for any leaks in the walls, ceilings or floors that may be indicative of water infiltration. If you find any, take note of their size and location so you can make repairs accordingly.

Next, inspect the exterior of your home for any areas that might be collecting water such as gutters, downspouts, and windowsills. Make sure these are all clear and in good condition. Check the crawl space and basement for any signs of dampness, mold or mildew. This could be a sign of a leak or poor drainage system. Make sure to address these issues if you see any.

Finally, make sure to look for any signs of structural damage that could be causing water infiltration issues. This could include cracks in the walls, shifting foundations, or any other structural issues that could cause water problems in the future. By doing a thorough inspection before you start your waterproofing work, you can ensure that your project will be successful and your home will remain safe from water damage in the long run.

Clear gutters and downspouts

Gutters and downspouts are a key element of waterproofing work. It’s important to ensure that these are cleared regularly of any debris or build-up, such as leaves and sticks, to allow water to flow freely away from your home. This can help to prevent damage caused by overflowing gutters.

To clear your gutters and downspouts, it is best to start at the highest point and work your way down. This will ensure that all of the debris is cleared out, and water flows away easily. You should also check that the downspouts are connected correctly, and are not blocked by any plants or landscaping.

It is important to wear safety gear while clearing gutters and downspouts, such as gloves, a face mask, and goggles. You should also be aware of potential hazards like power lines or other obstacles.

Once you have finished clearing the gutters and downspouts, it is important to inspect them for any signs of damage or corrosion. If you find any issues, it is best to get them fixed as soon as possible, as this can help prevent further damage in the future.

Everything You Need To Know About Roof Repairs and installation

Your roof is one of the most important parts of your home. It protects you from the elements and keeps your family safe and comfortable. That’s why it’s important to keep your roof in good condition.

If you’re thinking about roof repairs or installation, there are a few things you need to know. In this article, we’ll cover everything from the types of roofing materials to the different roofing styles. We’ll also give you some tips on how to choose a roofing contractor and what to expect during the roofing process.

By the end of this article, you’ll know everything you need to about roof repairs and installation.

Thoroughly inspect your roof

When it comes to roof repairs or installation, the first step is to thoroughly inspect your roof. This helps you determine the extent of the damage and the best course of action.

1.Check the roof for cracks, missing shingles, and any other signs of damage. You should also look for leaking water, growing vegetation, clogged gutters, or damaged flashing. Taking the time to make sure your roof is in good condition will help you avoid costly roofing repairs in the future. Once you have properly inspected your roof, you can move on to the next step. Make sure to keep a watchful eye on your roof in the future and take note of any changes over time. Regular inspections can help to catch minor issues before they become major repairs. Doing this can ultimately save you money in the long run as well.

2. Vanquish all the debris: After properly inspecting your roof, the next step is to make sure it is free of any debris. This is important because debris can trap moisture in and cause further damage. Clean out any leaves, twigs, dirt, or other debris from between shingles and along the eaves and gutters. You can also use a wire brush or even a broom to help remove any debris that may have gathered. Once you’ve removed all the debris, you should make sure to clear away any flammable material such as leaves or debris from your attic. This is an important safety precaution and could potentially save your home from a devastating fire. If you’re uncertain about the safety of certain materials, consult a professional before you start.

3. Know your roof: When it comes to roof repairs and installation, you need to know what kind of roof you have. Different types carry different weight limits and require different installation techniques. Knowing your roof type can save you a lot of trouble and confusion in the long run. For example, asphalt roofs require different installation methods than metal roofs. Asphalt roofs need more nails per shingle and must be placed further apart. Knowing the differences in installation methods can save you time and money. Take the time to read up on the different types of roofs and their installation specifics.

4. Patch any holes or cracks: Before you start with the repair or installation process, you’ll need to make sure any holes or cracks are patched and filled correctly. If left unchecked, water can penetrate through and cause extensive damage to your home. Pick up some roof cement or tar to patch up any holes or cracks that you find. If you need to make any repairs to the actual roofing materials, make sure to read up on the specific steps for the type of roof you have. For example, you may need to use roofing nails or sealing adhesive to patch a wooden shingle roof. If you’re unsure, contact a professional roofer with experience in your roof type.

5. Measure and cut your new shingles: There’s no doubt that replacing your old shingles with new ones can give your roof a facelift. You should measure each section of your roof so you know exactly how much material you need. Make sure to take into account the size of the gap between each shingle; even the smallest difference can have a big impact on the overall look of your roof. Once you’ve purchased your new shingles, you’ll need to cut them to the correct size as well. Make sure to measure twice and cut once. Take your time and ask a professional roofing contractor if you’re unsure of how to properly install your new shingles.

6. Apply roofing cement: The next step of the process is to apply roofing cement and to help secure the new shingles. Depending on your type of roof, the method and amount of cement you use can vary. Start by applying the cement along the nail line. Work in 3-foot sections and spread the cement evenly with a trowel. Once you’ve spread the cement, it’s important to make sure that it dries properly. Follow the instructions on your particular cement product for the suggested drying times. This can range anywhere from 2 to 12 hours. Be sure to check the drying time and make sure to allow enough time for the cement to dry completely.

7. Prime the flashing: Some areas may need flashing to help keep water from entering your home. If you’re unfamiliar with flashing, it’s a thin metal sheet that’s used to seal any gaps between the roofing material and the structure of your home. Make sure to start by priming the area where the flashing will be installed. Before you start, read the instructions and make sure you know the correct procedure for your flashing. If you’re unsure, consult a professional. Installing flashing incorrectly can cause water to seep in and cause disastrous damage to your home. Make sure to take your time and follow the directions carefully.

8. Apply a base course of asphalt felt: Before you start installing the new shingles, you’ll need to install a base course of asphalt felt on your roof. This provides a base layer of protection from the elements. Apply the asphalt felt in strips across the roof, overlapping each strip by at least 4 inches. The felt will act as a barrier against water and will help to keep the shingles in place. You can purchase asphalt felt in rolls at any home improvement store. Again, if you’re uncertain about the correct procedure make sure to consult a professional roofer.

9. Install the new shingles: Now comes the fun part – installing the new shingles! Make sure to follow the manufacturer’s instructions for the particular roofing material you’re using. Start at the bottom edge of the roof and work your way up. Make sure to leave a gap of at least 1/4 inch between each shingle. Nail the shingles in place

Are Impact Windows Energy Efficient?

Windows designed with impact glass are manufactured to be more secure and more resistant to the effects of severe weather than windows with conventional glass.

Impact windows, also known as storm-resistant windows, are constructed so that, when subjected to high winds and an impact, they will crack rather than shatter and completely break apart.

Windows that are energy efficient in private residences and commercial buildings are of considerable advantage to both the structures themselves and the people who are housed inside them. 

These long-lasting solutions not only increase the safety of a home or structure by making it more difficult for unauthorized individuals to enter, but they also offer protection from the adverse effects of storms and hurricanes.

You probably already know that installing impact windows may save your home and your valuables from damage, but did you know that they also have the incredible side advantage of reducing your heating and cooling costs?

Today, R&D Roofing will discuss whether are impact of windows energy efficient or not!

Are Impact Windows a Good Choice for Improving Efficiency?

In addition to providing enhanced safety from the damaging winds of hurricanes, Impact windows are also much more effective at conserving energy than regular residential windows. 

Because of their heavy-duty structure and use of high-performance glass, they are superior at shielding your home from the severe temperatures that may be found outdoors.

One of the finest items that may save you money on your energy bill is installing energy-efficient impact windows in your house. Homeowners who wish to replace or improve their windows frequently express concern about the financial impact of doing so. 

Homeowners should know that energy-efficient impact windows save energy and lower monthly energy bills. This is vital information, even though the cost is a valid issue for consumers.

Energy-efficient impact windows, also known as energy-saving windows, prevent the air inside of your home from being heated or cooled by the outside environment. And because people use less energy, their monthly energy expenses also decrease.

How long does it take to install Impact Windows?

When it comes to putting in impact windows, the installation process might appear challenging. However, you can have your impact window up and running in little time at all with the assistance of a few straightforward steps. 

The installation of impact windows typically takes anywhere from two to four hours to complete. The procedure for installation is, with a few notable variations, quite identical to that of installing a normal window. The installation of an impact window typically takes around two and a half hours.

Final Verdict

In short, impact windows are a wise/profitable idea to consider if you are searching for a window that may make a significant difference in the outward appearance of your house. 

In spite of the fact that installing them may be more time-consuming than installing standard windows, the end effect may be well worth the effort.

Get in touch with R&D Roofing if you want to have impact windows installed in your house or if you want more details about it.

Top Residential Construction Project Challenges

The residential construction sector is thriving, expanding rapidly while navigating a number of complex difficulties. Some issues have only recently arisen, and others have been around for as long as the industry has been.

The lifespan of a building project is riddled with possible pitfalls. A project manager’s primary responsibility is ensuring the site is operating effectively, safely, on time, and under budget. This can be a very tall order at times.

One research found that over 90 percent of construction projects ended up costing more than expected and 77 percent were far behind schedule.

The following are some of the most common problems that might arise during a residential construction project, as well as some preventative measures that can be taken to minimize their impact.

Residential Construction Project Challenges

While residential construction projects are becoming increasingly popular, there are a number of challenges that must be considered when planning and executing the project. Here are the major challenges:

Improper Risk Management:

Safeguards against long-term risk are a common practice for project managers. However, the immediate problems are generally ignored. These problems can quickly multiply and have a significant effect on profits.

Any minor issue might jeopardize a project; including untrustworthy subcontractors, scheduling issues or the changing tastes of stakeholders. This emphasizes the significance of being prepared for the unexpected. Schedule some wiggle room and budget for preventative measures like safety training to head off any problems.

Lack of Structure:

With goals, it’s easier to be efficient. With a precise aim, a building project might be on time or over budget (or both). Without goals, it’s hard to keep employees accountable for their work.

Project management includes performance management. To make this work, everyone needs defined tasks. Break project-wide goals into more minor, daily aims. If something still needs to be done, it piles up. Set accountability processes. So the project won’t collapse.

Fairly Mediocre Communication:

Effective communication is a must in every field of work, but it becomes much more crucial when tasks must be divided among several people. Tasks can fall through the cracks, and the team can be ignorant of an issue until it’s too late if there isn’t straightforward and effective Communication. This is why project managers need to establish rules and regulations.

The team should be updated on the day’s successes and failures via an open and transparent chain of command. Thus, issues may be addressed before they become problematic. Using various forms of software might be a great alternative to in-person meetings if necessary.

Cash Flow Delay:

The construction industry is heavily reliant on the often archaic practice of invoicing. And if payments are late, it might hurt a business’s financial flow. This might lead to a need for more resources and delays in other endeavors.

Consequently, there is a requirement for new approaches to billing. Construction firms may prevent cash flow issues from affecting other projects with upgraded software and sufficient follow-through.

Bottom Line

The Residential Construction Industry must work together to overcome these challenges and provide quality homes to the market. If you need any kind of help with residential construction, then you can contact R&D roofing.

Common Problems in Construction Management and Their Root Causes

The development sector is an influential force in international trade and the economy. The construction sector is a key economic driver in the United States.

However, what does “construction management” entail? Construction administration involves starting, planning, deciding, controlling, coordinating, motivating, and completing a construction project.

Construction management is essential for a successful project, regardless of the expertise of those working on it. Construction managers confront difficulties every day in this process. Problems range from easily manageable to tedious and eventually frustrating.

Below, we will discuss the most significant obstacles that construction managers must overcome.

Major Construction Management Challenges

Construction managers play an essential role. They engage the construction crew and client to ensure everyone is on the same path. They assure the end result of a building project meets the client’s expectations and is completed on time and on budget.
The following is a list of some of the most difficult aspects of managing construction projects:

Lack of Communication in Construction Management:

When it comes to construction management, communication is crucial since, without it, crucial activities may go unnoticed, leading to the project’s collapse.
Approximately 57% of initiatives are unsuccessful because of the poor client or team communication and lack of openness.
Managers that want to improve their ability to communicate with their teams, stakeholders, and customers must develop those abilities. By doing so, catastrophic failures like failing to finish a project on time can be avoided.

Responsibility and Accountability:

Unsurprisingly, accountability is a major issue in construction management since teams often lack a sense of ownership over the project and it’s a successful completion. The team’s lack of accountability and responsibility stems not from malice or a lack of effort.

It’s possible that this is due to the fact that everyone on the team has an excessive amount of work and not enough free time. It’s also possible that team members are confused about their ultimate objective. Construction managers must be transparent about who is responsible for what to foster a culture of accountability and responsibility amongst team members.

It’s also crucial to illustrate to the team how their work contributes to achieving the project’s overarching objectives. In addition, the team needs regular check-ins to evaluate its performance. Each participant might then learn about their strengths and areas for growth and take responsibility for making the necessary changes.

Workforce aging and skills gap:

The shortage of available workers has been an enormous challenge for project managers in the building industry. Simply put, a skills gap has emerged due to an aging workforce and a lack of enthusiasm among young people for working in the construction industry. The construction team’s output suffers due to the shortage of qualified individuals.

COVID-19 poses challenges for construction managers:

The spread of covid-19 has had far-reaching effects on society and the economy. The construction industry is in a different place now than before, while other sectors have been able to weather the storm and profit from it.


The construction industry is massive, intricate, and rapidly developing. The expansion of the construction sector and the difficulties posed by Covid-19 provide more obstacles to the field of construction management. Construction managers must constantly adapt their strategies to tackle various challenges on the job.

Contact R&D roofing for construction management services.

Steps to Planning a Home Remodeling Project

Change is inevitable because it’s human nature to seek improvements in one’s appearance or environment every once in a while. Due to the high cost involved, home remodeling is not a common event in our household.

With a solid strategy, your renovations should go off without a hitch. It’s much better to do it right the first time than to spend time afterwards lamenting your decision-making.

Investing in a home renovation is a great way to modernize your residence, provide extra room for your family, and boost your house’s resale value.

Proper planning is essential for the success of any home improvement project. Let’s learn more about the steps of a residential remodeling project.

5 Major Stages to Planning a Home Remodeling Project

Step 1: Establish What You Want to Achieve With the Remodel:

Establishing your objectives for the home improvement project you are considering should be the very first thing you do. The following stages of the planning process will all take their cues from the vision you have for the project.

Your goals are significant in determining the direction that the redesign will take, regardless of whether you are trying to increase the value of your house, you need more space for a growing family, or you want to update your living area.

Step 2: Set a Budget:

The following step requires a significant choice: how much money do you want to spend on your home improvement project?

Establishing your price points early on is quite important, despite the fact that they might vary substantially depending on the project.

It will be much simpler to maintain financial order if you begin the process by developing a thorough budget.

Step 3: Assemble Your Group:

To complete your home renovation project, you will require the assistance of a skilled labor force. It is possible to assure the success of your project by cooperating with a qualified design team, in addition to builders and remodelers.

At R&D, we provide trusted services from our building partners in addition to industry-leading design studio consulting services.

Step 4: Choose Design Elements:

The next stage in planning your remodel is to select the multiple design components that will be included in the space, such as cabinets, worktops, closets, and window treatments.

Your design consultant will be able to assist you in navigating the available alternatives in a way that is congruent with your vision and fits within your financial constraints.

5th Step: Establishing a Final Timeline

Following this, you will need to consult with your design and construction teams to devise a feasible schedule.

Because the final timeframe will also need to take into account the availability of your contractors, this phase needs to be finished many months before the date that you estimate the project will begin.

You will also get the required permissions to comply with the local remodeling rules if you have a defined timeframe.

Wrapping Up

It is crucial to start the plan for developing your home remodeling project several months in advance of when you want the work to be finished. Get in touch with R&D Construction and Roofing right away to get started!

5 Most Common Roof Repairs Issues And How to Overcome It?

Everyone is worried about the scenario that is now being referred to as roof repairs. These things, from pinhole leaks to gaping fractures, are almost unavoidable.

Do you ever wish you knew how to stop roof leaks before they started? Several things can shorten a roof’s lifespan.

A roof can deteriorate and experience common problems in several different ways. You probably overlook a minor leak, which may continue undiscovered for years.

There will be significant long-term consequences before you recognize any problems. The sooner you take care of these roofing problems, the less likely you are to suffer from any severe consequences.

In this article, we will discuss the top 5 roofing repair concerns and how the professionals at R&D Roofing services can assist with any roofing repair needs.

5 Most Common Roofing Issues

  • Roof Leaks

Leaks are a typical roofing repair concern. Strong winds, rain, or snow pound your roofs, causing moisture to collect under the layers. Delays in addressing roof leaks might cause more harm.

Roof leaks often occur around the chimney, gutters, valleys, and vents. Though most problems are unavoidable, there are ways to extend a roof’s life.

R&D Construction and Roofing offers repair services to solve these issues. Our maintenance crew will examine and maintain them so you can relax.

  • Damaged Shingles:

Roofing experts advise replacing a whole shingle if even a little section is missing. If shingles aren’t put together correctly or fastened down on the edges, they might come loose and cause leaks.

Damage to the shingles can also be caused by extreme weather. The metal flashing on a roof is readily pried off by strong winds, leaving the roof vulnerable to water damage.

Make sure your roof has adequate ventilation, too. By doing this, a shingle will be protected from the inside from rain and snow.

  • Damaged Flashings:

Flashings are crucial in preventing water damage to components otherwise exposed to the elements. It prevents air leakage from HVAC units, chimneys, and vent pipes by creating a seal around these openings. As they may readily come loose without proper installation, this roofing repair issue can be avoided with little effort.

  • Damaged soffit or fascia boards:

Fascia boards, soffits, and guttering all work together to direct water away from your home. They may do much harm if not carefully maintained, especially in extreme weather.

For instance, the fascia or soffit boards might become dislodged from the main structure if water or ice accumulates and causes disturbance.

Because of this, they may rot, and the rot may spread to other parts of your roof. The opening will eventually let in squirrels and birds, who may do even more harm.

We only use long-lasting, high-quality roofing repair materials to guarantee a steady water flow. Another option is to use a special coating that somewhat inhibits decay.

Don’t hesitate to contact our professional roofers for further details on fascias, soffits, and guttering if you’re still unsure of the requirements.

  • Shrinkage: 

Extreme weather can shrink roofs. Adverse weather conditions, including fast heating and cooling, might cause them to shrink if not correctly fitted. Regular inspections and maintenance help prevent shrinkage-related roofing repair difficulties.

Final Verdict

Don’t hesitate to contact R&D Construction and Roofing if you require a qualified roof inspector, repairman, or installer for roof repairs. We’re delighted to offer free consultation and price estimates.

Call Now ButtonCall Now: 727-351-2697